Hydron WP100 15lt

$130.00

Hydron WP100® is a waterborne flexible SBR waterproof membrane designed for use under tiled finishes that is capable of accommodating expected structural movement. It complies with the performance requirements of Building Code of Australia 2007 Clause FP1.4 and FP1.7 (Volume 1 – Class 2 to Class 9 buildings) and P2.2.2 and P2.4.1 (Volume 2 – Class 1 and Class 10 building Housing Provisions). May be used under cement based tile adhesives that meet the requirements of Australian Standard 2358. VOC Content of Wetite® is below the maximum VOC Content for Architectural and Interior Sealants as required by Green Star Office Design V2, V3, Office Interiors V1.1, and APAS D181.

WP100 Technical Data Sheet

WP100 MSDS

Click here to refer to Waterproofing-Full-Instructions

SKU: CRO-WP100 Category:

Description

Undertile Waterproofing

Additional information

Features & Benefits

Class III membrane to AS4858 Complies with Building Code of Australia FP1.4 and FP1.7 and P2.2.2 and P.2.4.1, Complies with AS 3740 Low VOC content, Permanently flexible – accommodates cracking in substrate, Excellent adhesion to a wide variety of substrates, Dries to a keyed finish to promote adhesion with tile adhesives, Single pack, Quick drying, Safe to easy to use, No priming required, Designed for use with a bond-breaker

Areas of Use

Shower recesses, Bathroom floor areas, Laundries, Kitchens, Balconies, Patios, Steel (suitably primed), Concrete, cement render, plaster, Wet area wall lining board, Hardie/CSR sheet flooring, Brick Light weight aggregate block, Plasterboard, MDF, Plywood sheet flooring